Skip to content
BestStorefrontThe technology behind better commerce.

Educational cost model

3PL fulfillment cost calculator

Enter the terms from the 3PL quote you are evaluating. The inputs open with an illustrative quote, not any provider's rates, and every part of the formula remains visible.

Updated Oct 20, 2026 · Provider terms checked Oct 20, 2026 · Methodology

Cost per order

Fulfillment cost per order is the month's 3PL bill divided by orders shipped. Flexport adds the shortfall below a $5,000 monthly minimum and charges $2.40 per cubic foot per 30 days for October–December storage, $0.81 otherwise (checked Oct 20, 2026). The worked examples, on illustrative fees, come to $17.87 an order at 300 orders ($5,360 billed in October–December) and $12.69 at 1,000. The model works in US dollars, so enter a USD quote; Sendcloud, the one euro-priced provider listed below, is shown in euros. For the wider picture of what a 3PL bills, read the ecommerce fulfillment costs guide.

Order profile

Monthly operating charges

Next step

Check your numbers against real fulfillment pricing

Turn your modeled cost into vendor quotes. The date beside each figure is when its overview was last checked; the published-pricing table further down is the Oct 20, 2026 check. Listed alphabetically, not ranked. Each overview is based on first-party sources, not hands-on testing.

BestStorefront may earn a commission from links on this page. Affiliate relationships do not influence our coverage, rankings, or editorial conclusions.

See the fulfillment desk for the full buying framework.

Worked examples · Checked Oct 20, 2026

Fulfillment cost by order profile

Three order profiles run through the calculator's line items. The per-order fees are illustrative, because none of ShipBob, ShipMonk or Flexport publishes pick, pack or shipping rates: $3.00 for the first item, $0.50 per additional item and $8.00 average shipping, the same as the calculator's opening quote. Storage and the minimum use Flexport's published terms (see the Flexport fulfillment review), checked Oct 20, 2026: $0.81 per cubic foot per 30 days from January to September, $2.40 from October to December, and a $5,000 monthly minimum measured against all spend except D2C storage. The last row applies ShipMonk's published minimum formula (monthly orders × first-item pick fee, less 20%) to the same volumes.

LineProfile 1: 300 orders, 1 unit each, 150 cu ftProfile 2: 1,000 orders, 1.5 units each, 600 cu ftProfile 3: 3,000 orders, 2 units each, 2,000 cu ft
Pick/pack, first item300 × $3.00 = $9001,000 × $3.00 = $3,0003,000 × $3.00 = $9,000
Additional items0 × $0.50 = $0500 × $0.50 = $2503,000 × $0.50 = $1,500
Shipping300 × $8.00 = $2,4001,000 × $8.00 = $8,0003,000 × $8.00 = $24,000
Spend counted toward the minimum$900 + $0 + $2,400 = $3,300$3,000 + $250 + $8,000 = $11,250$9,000 + $1,500 + $24,000 = $34,500
Flexport $5,000 minimum$5,000 − $3,300 = $1,700 shortfallCleared: no shortfallCleared: no shortfall
Storage, Jan–Sep ($0.81 per cu ft)150 × $0.81 = $121.50600 × $0.81 = $4862,000 × $0.81 = $1,620
Storage, Oct–Dec ($2.40 per cu ft)150 × $2.40 = $360600 × $2.40 = $1,4402,000 × $2.40 = $4,800
Billed, Jan–Sep$3,300 + $1,700 + $121.50 = $5,121.50$11,250 + $486 = $11,736$34,500 + $1,620 = $36,120
Per order, Jan–Sep$5,121.50 ÷ 300 = $17.07$11,736 ÷ 1,000 = $11.74$36,120 ÷ 3,000 = $12.04
Billed, Oct–Dec$3,300 + $1,700 + $360 = $5,360$11,250 + $1,440 = $12,690$34,500 + $4,800 = $39,300
Per order, Oct–Dec$5,360 ÷ 300 = $17.87$12,690 ÷ 1,000 = $12.69$39,300 ÷ 3,000 = $13.10
ShipMonk-formula minimum, for comparison300 × $3.00 × 0.8 = $7201,000 × $3.00 × 0.8 = $2,4003,000 × $3.00 × 0.8 = $7,200
  • Profile 1 is the only profile below the minimum. Its $3,300 of counted spend leaves a $1,700 shortfall, which adds $5.67 an order ($1,700 ÷ 300). To clear $5,000 at 300 orders, counted spend has to average $16.67 an order. Flexport says that, on average, it expects only merchants fulfilling under roughly 500 orders a month to be affected.
  • Profile 2 and Profile 3 clear the minimum, so the storage season is the swing: October–December storage adds $954 a month at 600 cubic feet ($0.95 an order) and $3,180 at 2,000 cubic feet ($1.06 an order).
  • Above the minimum, cost per order does not fall with volume here, because the illustrative fees are flat: Profile 2 to Profile 3 rises from $12.69 to $13.10 in October–December because each order carries more items and more storage. ShipMonk says its fees adjust to order volume (checked Oct 20, 2026), so ask each 3PL for its rate at your volume.
  • ShipMonk's formula gives $720, $2,400 and $7,200 at the three volumes. Its pricing page doesn't say which charges count toward the minimum, so the table shows no shortfall for it; ask before modeling a slow month.

Method note

Each cell is quantity × the named rate. Flexport counts fulfillment, reserve storage, parcel, freight, pallet and case handling, label services, prep and card-processing spend toward its minimum, but not D2C storage, so counted spend here is pick/pack + additional items + shipping, and billed = counted spend + any shortfall + storage. Per order = billed ÷ orders, rounded to the cent. Storage is a monthly cubic-foot total; Flexport calculates it daily, with a $0.10 daily minimum per SKU. Receiving, returns, platform fees and peak fulfillment surcharges are left out; the two-quote example below includes the first three. The calculator above tests its minimum against all usage, storage included, so for a Flexport rate card compare the minimum with usage less storage.

Checked Oct 20, 2026

Published provider mechanics

These are not directly comparable. One provider publishes a rate card; two require custom quotes. Each summary was re-read on the provider's own pricing page on Oct 20, 2026(for Flexport, its help-center pricing overview and Monthly Minimum Fee articles). Use your actual quote or account rate card in the calculator.

ShipBob

Custom quote. Standard fees cover implementation, receiving, warehousing and picking, packing and shipping each order; kitting and larger wholesale or B2B orders cost extra. ShipBob says its software is free for all customers and standard boxes and packing supplies are free. Returns carry a flat fee covering every item in the return, charged when the return reaches its fulfillment center. No dollar rates are published.

Official pricing source

ShipMonk

Custom quote covering storage, fulfillment, shipping, returns (per carton and per additional item) and special projects; platform, onboarding and technology add-on fees appear in the quote. The monthly minimum is monthly orders × first-item pick fee, less 20%: an illustrative 1,000 orders at a $3.00 fee gives $2,400. Batches under 50 orders carry a batching fee.

Official pricing source

Flexport

Rate card in the Flexport portal, unit- or zone-based; base rates include standard receiving, pick and pack, packaging and transportation, with peak surcharges billed separately. Storage is $0.81 per cubic foot per 30 days Jan–Sep and $2.40 Oct–Dec, with a $0.10 daily minimum per SKU; long-term storage after 365 days is $6.90. A $5,000 monthly minimum applies from Jan 1, 2026, measured against all spend except D2C storage, with the shortfall billed the next month. Account rate cards can differ.

Official pricing source

Continue with the fulfillment cost guide, 3PL RFP checklist, or shipping and fulfillment category. Browse the software directory and read how BestStorefront researches before treating any model as a decision.

How this tool works

Fulfillment cost calculator: method, assumptions and an example

Normalizes a 3PL (outsourced fulfillment) quote into a monthly total, cost per order and share of revenue, and shows when a monthly minimum overrides usage, so quotes priced in different ways can be compared line by line.

Inputs

  • Monthly orders and average units per order.
  • Base pick/pack fee per order and additional-item pick fee.
  • Average shipping cost per order.
  • Monthly storage, receiving, platform fee, returns (count × fee) and special projects.
  • Any monthly minimum spend, one-time onboarding, and optional monthly revenue.

Method

  • Usage = orders × pick/pack + extra units × additional-item fee + orders × shipping + storage + receiving + platform fee + returns × return fee + projects.
  • Monthly cost = the greater of usage and the monthly minimum (the tool flags when the minimum applies).
  • Cost per order = monthly cost ÷ orders; share of revenue = monthly cost ÷ revenue.

Assumptions

  • All fees come from the quote you enter; the tool contains no provider's rates.
  • Additional units = orders × (units per order − 1).
  • The minimum is compared with total usage. Providers can measure it differently: Flexport counts all spend except D2C storage (checked Oct 20, 2026), so for a Flexport rate card compare the minimum with usage less storage, as the order-profile examples on this page do. Check what counts toward yours.

Limitations

  • Seasonal storage, long-term storage surcharges, peak fulfillment surcharges and carrier fuel surcharges are not modeled unless you include them. Flexport's storage, for example, is $0.81 per cubic foot per 30 days from January to September and $2.40 from October to December (checked Oct 20, 2026).
  • One month at a time: run your slowest and busiest months separately, because a minimum can apply in one and not the other.
  • A quote is not an invoice; reconcile against the provider's billing terms.

Worked example

Two illustrative quotes, not any provider's rates. Quote A: $3.00 pick/pack, $0.50 per additional item, $8.00 average shipping, $400 storage, $100 receiving, a $250 platform fee, $3.00 per return and a $5,000 monthly minimum. Quote B: $2.50 pick/pack, $0.75 per additional item, $9.00 shipping, $300 storage, $2.50 per return, and no receiving fee, platform fee or minimum. Assumptions: 1.5 units per order (0.5 additional items per order), a 3% return rate (30 returns at 1,000 orders, 9 at 300), $60 revenue per order, and storage, receiving and platform fees that stay flat in a slow month. The calculator opens with Quote A at 1,000 orders.

Quote A, 1,000 ordersQuote A, 300 ordersQuote B, 1,000 ordersQuote B, 300 orders
Pick/pack1,000 × $3.00 = $3,000300 × $3.00 = $9001,000 × $2.50 = $2,500300 × $2.50 = $750
Additional items500 × $0.50 = $250150 × $0.50 = $75500 × $0.75 = $375150 × $0.75 = $112.50
Shipping1,000 × $8.00 = $8,000300 × $8.00 = $2,4001,000 × $9.00 = $9,000300 × $9.00 = $2,700
Storage + receiving$400 + $100 = $500$500$300 + $0 = $300$300
Platform fee$250$250$0$0
Returns30 × $3.00 = $909 × $3.00 = $2730 × $2.50 = $759 × $2.50 = $22.50
Usage$12,090$4,152$12,250$3,885
Monthly minimum$5,000, not reached$5,000 applies: +$848NoneNone
Billed / per order$12,090 / $12.09$5,000 / $16.67$12,250 / $12.25$3,885 / $12.95
Share of revenue$12,090 ÷ $60,000 = 20.15%$5,000 ÷ $18,000 = 27.78%$12,250 ÷ $60,000 = 20.42%$3,885 ÷ $18,000 = 21.58%

Quote A is $0.16 an order cheaper at 1,000 orders ($160 a month). In a 300-order month its usage ($4,152) falls below the $5,000 minimum, so it costs $3.72 an order more than Quote B ($1,115 a month). Over a year of nine 1,000-order months and three 300-order months, A costs 9 × $12,090 + 3 × $5,000 = $123,810 and B costs 9 × $12,250 + 3 × $3,885 = $121,905: B is $1,905 cheaper. Shipping is still the largest line (66% of Quote A's usage at 1,000 orders), so compare carrier rates and packaging as well as pick fees.

How to read the result

  • Run each provider's quote through the same inputs at your average and your slowest month, then compare cost per order and the annual total.
  • If the minimum applies, the gap between usage and the minimum is pure overhead: negotiate it, or ask how the provider sets it.
  • Use the 3PL RFP checklist to request quotes in a comparable format.

Questions

What is the best fulfillment provider?
It depends on order volume, product size, where your customers are and how much storage you need. BestStorefront compares ShipBob, ShipMonk and Flexport on their published mechanics (checked Oct 20, 2026): ShipBob and ShipMonk price by custom quote, while Flexport publishes storage rates and a $5,000 monthly minimum. Run each quote through this calculator to compare cost per order at your volume.
What hidden fulfillment costs should I check?
Monthly minimums, receiving and inbound fees, peak-season and long-term storage, returns processing, kitting projects and onboarding fees. Flexport's published terms show the scale (checked Oct 20, 2026): storage rises from $0.81 to $2.40 per cubic foot per 30 days in October to December, long-term storage after 365 days is $6.90 per cubic foot per 30 days, return-to-sender processing is $3 per unit and prep jobs carry a $200 minimum. The calculator has a line for each cost type.
How are 3PL pick and pack fees structured?
Published terms show three structures (checked Oct 20, 2026). ShipMonk sets pick fees during the sales process from your typical monthly order volume and other factors, and builds its minimum on the first-item pick fee. Flexport's unit-based pricing charges per unit by item size and units per order, and its zone-based pricing charges per package by size and shipping zone; both include receiving, pick and pack, packaging and transportation. None of these providers publishes an average pick fee, so the calculator's $3.00 per order plus $0.50 per extra item is illustrative.
How do 3PL monthly minimums work?
A minimum is a floor: if your spend is below it, you pay the shortfall. Flexport applies a $5,000 monthly minimum to all accounts from Jan 1, 2026, measured against all spend except D2C storage (fulfillment, reserve storage, parcel, freight, pallet and case handling, label services, prep and card processing), and bills the difference on the next month's first invoice; it says that, on average, it expects only merchants fulfilling under roughly 500 orders a month to be affected. ShipMonk sets its minimum from projected volume: monthly orders × first-item pick fee, less 20%, so 1,000 orders at a $3.00 first-item fee gives 1,000 × $3.00 × 0.8 = $2,400 (both checked Oct 20, 2026). In the order-profile examples, a 300-order month counts $3,300 against Flexport's $5,000, so the shortfall adds $1,700, or $5.67 an order.
How much does peak-season 3PL storage cost?
Flexport publishes standard storage of $0.81 per cubic foot per 30 days from January to September and $2.40 from October to December, almost three times as much, with a $0.10 daily minimum per SKU (checked Oct 20, 2026). For 500 cubic feet that is 500 × $0.81 = $405 against 500 × $2.40 = $1,200 per 30 days. ShipBob and ShipMonk set storage in the custom quote, so ask each for its October to December rate.
Do 3PLs charge for returns?
Usually, and on different bases (checked Oct 20, 2026). ShipBob charges a flat fee once a return arrives at its fulfillment center; ShipMonk charges per carton and per additional item; Flexport charges a per-unit inspection fee, and $3 per unit to process return-to-sender packages. At 30 returns a month and $3.00 each, the example adds $90.
How much does 3PL fulfillment cost per order at 300, 1,000 and 3,000 orders?
It depends on the quote, because none of ShipBob, ShipMonk or Flexport publishes pick, pack or shipping rates. With illustrative fees of $3.00 for the first item, $0.50 per additional item and $8.00 shipping, plus Flexport's published storage rates and $5,000 minimum (checked Oct 20, 2026), October-to-December cost is $17.87 an order at 300 orders, $12.69 at 1,000 and $13.10 at 3,000. The 300-order month pays a $1,700 minimum shortfall; the other two clear the minimum.
How do I calculate fulfillment cost per order?
Add every monthly charge on the quote (pick/pack, extra items, shipping, storage, receiving, platform fee, returns and projects), take the greater of that total and any monthly minimum, and divide by orders. Quote A in the example: $12,090 ÷ 1,000 orders = $12.09 an order, rising to $5,000 ÷ 300 = $16.67 in a 300-order month because the minimum applies.

Your inputs stay in your browser. Our analytics record only that a tool was started, completed or shared, and the page address without your figures. A result link you copy does carry your numbers, so share it only where you're happy for them to be seen.

Checked Oct 20, 2026

Published pricing for the fulfillment and shipping tools we cover

From each provider's own pricing page on Oct 20, 2026 (Sendcloud's monthly-billing figures as read Oct 19, 2026), in USD unless stated. Listed alphabetically, not ranked. 3PLs and shipping software bill different things: a 3PL quote goes into the calculator above, while label software is a monthly platform fee on top of postage.

ProviderPublished pricing
FlexportRate card in the Flexport portal (unit- or zone-based); storage $0.81 per cubic foot per 30 days Jan–Sep and $2.40 Oct–Dec; $5,000 monthly minimum fulfillment spend since Jan 1, 2026.
PitneyShipPay-as-you-go: no monthly fee, plus a 5% usage fee on each label; Premium $34.99/month after a 30-day trial; Enterprise quoted. Postage is extra.
SendcloudFree plan up to 20 parcels a month; Lite €28/month billed yearly for 400 labels a month plus €0.10 per label; Growth €87/month billed yearly for 1,000 labels plus €0.09 per label. Monthly billing, as read Oct 19, 2026: Lite €35 plus €0.12 per label, Growth €109 plus €0.11. Prices shown in euros.
ShipBobCustom quote covering implementation, receiving, storage and pick, pack and ship; software free; flat return fee.
ShipMonkCustom quote; monthly minimum = monthly orders × first-item pick fee, less 20%.
ShippoStarter free up to 30 labels a month ($0.05 per label on your own carrier account); Pro from $19/month for 1–200 labels, or $205/year.
ShipStationStarter from $14.99/month (50 shipments), Standard from $29.99 and Premium from $349.99; 30-day free trial; the page shows 20% savings for annual billing.